Creality CR-10: large prints are its specialty

3D printers enjoy greater and greater popularity, and are available in various price brackets. Obviously, fully professional devices are very expensive, but quite good ones can be purchased for as little as 200 USD. The best 3D printers don’t have to cost loads of money. A little disadvantage is the fact that they’re usually very small, and therefore their print isn’t sizeable. Fortunately, the manufacturer Gearbest, in accord with the customers’ needs and requirements has made Creality CR-10.

Specifications Creality CR-10:

Machine Dimensions: 420 x 420 x 420 mm
Build volume: 300 x 300 x 400 mm
Printing technology: FDM (Fused Deposition Modeling), single extruder
Layer resolution: 0.1 to 0.4 mm
Speed: 200mm/s
Software: Cura
Connectivity: USB, micro SD card

More Specifications…

Creality CR-10: advantages

Creality CR-10 is distinctive just by its dimensions. It’s a really large device, and quite low- priced. Creality CR-10 stands out because of its extensive working area and quality of print. The working area is as large as 30 x 30 x 40 cm, and it allows to print relatively big elements. They are very precise and distinguished for their quality. Additionally, the control box is very intuitive. The user can control the temperature and the filament level. Thanks to the perfect technical parameters and abilities, we can print numerous useful objects in large size. So it’s possible to make for oneself such objects as a phone case, figures, tools and silicon cake forms. The only limit is imagination.

Creality CR-10 is sold in assembly kits, but as the maker recommends, it’s easy and shouldn’t take more than 15 minutes. Of course you don’t need to have any specialist tools, because they’re attached.

Frankly speaking, printing more complex elements isn’t quick. It may take as much as a few hours. The worst that can happen in such a situation is the running out of filament during the process. Then the whole effort is wasted. Fortunately, with Creality CR-10 we get rid of the problem. Printer signalizes when the filament is out, and stops work. But right after it’s refilled, the print is resumed. Of course, it may happen that we lose power. We don’t need to be afraid of this either, because right after it’s on, the print is continued. So the printer will work out ideally for long printing.

The instruction is also noteworthy. Printer is made from aluminum, so it doesn’t corrode. The design is notable too. The device looks excellent and no doubt it’s distinct.

Drawbacks of Creality CR-10

Undoubtedly, Creality CR-10 has many pluses. But there are minuses as well. First of all, for some the assembly may be difficult. Printer takes very long to warm up, so preparation for printing can be very tedious. Despite the fact that, as the manufacturer recommends, the device prints from plastic filaments, it doesn’t cope well with ABS filament. Nonetheless it’s worthy of note, and it can provide us long hours of fun and thrill.

Is it worth to buy Creality CR-10: the device’s evaluation

The device is noteworthy, an ideal choice both for firms and individuals. Thanks to this printer we can produce many useful models which will work out also for education.